ABB Module 07EA63R1 ABB 07EA63 R1 Analog Input affordable price effective service

ABB Module 07EA63R1 ABB 07EA63 R1 Analog Input affordable price effective service

Product Description:

The red LED Ovl. goes out when the overloaded output is switched on again automatically.
The acknowledgement of the error message, i.e. the resetting of the error flags, is carried out according to chapter B4.8 (Appendix), Acknowledgement of error messages in the basic unit.The outputs are safe against reverse polarity and forced supply of 24 V DC. Use of the digital output signal at the terminal 46
(A 62,00) for the high-speed counter The output A 62,00 can be assigned to the internal highspeed
counter by configuration. If the counter is used in the operating modes 1 or 2 (up-counter), the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to
be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").

Related Product Recommendation:

Product's Character:

IResolution in the PLC system: The measured values are converted with a resolution of
12 bits, i.e. 11 bits plus sign for voltage and 12 bits without sign for current. The ranges 0...5 V und ±5 V are converted with 10 bits plus sign.the output A 62,00 is only available for the counter. If the output is to use as a normal digital output, it has to Further details can be found in volume 2, chapter 5.1 "General
information for the use of analog inputs and outputs". In order to make sure, that unused input channels have a defined 0V level, they may be shorted to AGND. Unused inputs must be configured with "unused".
The relationship between the analog input signals and the converted numbers is illustrated in the following figures. be made sure, that the high-speed counter is not configured to the operating modes 1 or 2 (see also the chapter "High-speed counter").Features of the analog inputs:The 8 analog inputs are not electrically isolated.The resolution of the A/D converter is 12 bits. Analog signals are conducted in shielded cables (seeThe analog inputs can be configured individually in a lot of different operating modes (even as digital inputs). The configuration is performed by setting certain bits in the system constants KW 86,00 to KW 86,07 as follows

DSBBN002-0 Back Plane ABB
DSBC110 57310256-E/1 DSBC 110 Bus Termination Module ABB
DSBC111 57310256-K/1 DSBC 111 Bus Module ABB
DSBC170 57310256-DB Bus Module ABB

DSBC172 57310001-KD/5, 57310001-KD DSBC172 Bus Repeater Module ABB
DSBC172N 3BNP000467R1 Repeater Module ABB
DSBC173 57310001-KH DSBC 173 Bus Extender S100 I/O Bus ABB
DSBC173A 3BSE005883R1 Bus Extender S100 I/O Bus ABB
DSBC173N 3BNP000468R1 Repeater Module ABB
DSBC174 3BSE012211R1 DSBC 174 Bus Extender Module - S100 I/O Bus ABB
DSBC176 3BSE019216R1 Bus Extender Board ABB
DSBSN001 Digital Output Board ABB
DSCA114 57510001-AA DSCA 114 Communication Board ABB
DSCA124 57520001-BU Communications Module ABB
DSCA125A 57520001-CY Communications Board ABB
DSCA130 57510001-AT DSCA 130 MB200 Communication Board ABB
DSCA170 57310256-DB / 4 Communications Board ABB
DSCA180B 57520001-G2 Communications Module ABB
DSCA190V 57310001-PK DSCA 190V Communications Module ABB
DSCA310 57520001-AH/1 Communications Board ABB
DSCA325 57520001 Communications Board ABB
DSCI112 Communication Module for Master 215 ABB
DSCL110 57310001-HD DSCL 110 Redundancy Control Unit ABB
DSCL110A 57310001-KY DSCL 110A Redundancy Control Unit ABB
DSCS115 57520001-AD/4 Communications Board ABB
DSCS116 5752 0001-BZ Communication Module ABB
DSCS117 57520001-CN / 9 Communications Board ABB
DSCS130 Remote I/O Controller Module ABB
DSCS131 57310001-LM Communications Module ABB
DSCS140 57520001-EV MasterBus 300 Communication Module ABB
DSCS150 DSCS141 DSCS 150 Communication Module ABB
DSDI 110 57160001-A/13,57160001-A Digital Input Module ABB
DSDI 110A 57160001-AAA/2 DSDI110A Digital Input Module ABB
DSDI 110N 3BSE018525R1 Digital Input Module ABB

The use of the product: